Removing Gas-Discharge Headlight

→ Switch off ignition and remove ignition key.

→ Switch off the relevant loads when changing bulbs.

→ Only use bulbs listed in the bulb table.

→ Only install clean bulbs that are free of grease.

→ Always use a cloth or soft paper when working with bulbs.

→ Observe the safety instructions when changing a bulb in a Bi-Xenon headlight.

→ In certain states, it is compulsory to carry spare light bulbs.

Information 

• Some of the repair illustrations show only one side of the vehicle  .
• Naturally, some steps also have to be performed on the opposite side of the vehicle as well  .
  Fig 1: Identifying Position Of Gas-Discharge Headlight

  Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Loosen fastening screws -2-  on the cover and remove cover -1-  .
   Fig 2: Opening Cover And Screws

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Release gas-discharge headlight by turning once in direction of arrow and carefully remove from the bracket.
   Fig 3: Releasing Gas-Discharge Headlight

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Release -b-  and unplug electric plug connection.
   Fig 4: Disconnecting Electric Plug Connection

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.