Removing Light Bulb Igniter

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Assembly work may only be carried out if the mechanic is wearing the working clothes and shoes approved by Porsche  .
• The new part must only be removed from the ESD (electrostatic discharge) protective packaging just before installation and at the position at which the part is to be installed  .
• Never touch the electric pins and plug contacts  .

Information 

• Some of the repair illustrations show only one side of the vehicle  .
• Naturally, some steps also have to be performed on the opposite side of the vehicle as well  .
• These must be carried out as a mirror image of the steps shown  .
  Fig 1: Identifying Position Of Light Bulb Igniter

  Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Unscrew fastening screws -1-  .
2. Carefully remove light bulb igniter -2-  from the headlight.
   Fig 2: Removing Light Bulb Igniter

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Release electric plug connection -3-  (-a-  ) and disconnect it -b-  .
   Fig 3: Disconnecting Electric Plug Connection

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.