Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Anti-roll bar clamp to front-axle cross member | Hexagon-head bolt, M10 x 60 + hexagon nut | Tightening torque | 65 Nm | ||
| Connecting link (suspension/stabilizer) to anti-roll bar | Collar nut, M10 x 1.5/always use new collar nut following removal | Initial tightening | 40 Nm (30 ftlb.) | ||
| Connecting link (suspension/stabilizer) to anti-roll bar | Collar nut, M10 x 1.5/always use new collar nut following removal | Final tightening | +30° |