Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Connecting link (PDCC actuator) to anti-roll bar | Collar nut, M12 x 1.5/always use new collar nut following removal | Initial tightening | 50 Nm (37 ftlb.) | ||
| Connecting link (PDCC actuator) to anti-roll bar | Collar nut, M12 x 1.5/always use new collar nut following removal | Final tightening | +50° | ||
| Connecting link (PDCC actuator) to spring strut (actuator holder) | Collar nut, M12 x 1.5/always use new collar nut following removal | Initial tightening | 50 Nm (37 ftlb.) | ||
| Connecting link (PDCC actuator) to spring strut (actuator holder) | Collar nut, M12 x 1.5/always use new collar nut following removal | Final tightening | +50° | ||
| Hydraulic lines to connecting link (PDCC actuator) | Banjo bolt, M12 x 1.5 | Tightening torque | 26 Nm (19 ftlb.) | ||
| Holder for fixing device for pressure lines to connecting link (PDCC actuator) | Countersunk screw, M6 x 12 | Tightening torque | 10 Nm (7.5 ftlb.) |