LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Boxster S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (94 - Lights, Lamps, Switches, Exterior -- CARRERA (997)) >> WM 942319 Removing And Installing High Beam Halogen Bulb (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Removing High Beam Halogen Bulb

Removing High Beam Halogen Bulb

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the side lid -1-  and remove it (observe markings indicating direction to turn).
    Fig 1: Removing Lid
    G09830721Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Pull off electric connector -2-  .
    Fig 2: Pulling Off Connector
    G09830722Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Disengage retaining bow -3-  using a screwdriver and pull out lamp -4-  .
    Fig 3: Disengaging Retaining Bows
    G09830723Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals