Removing Rear-View Mirror
NOTE:
Voltage peaks
- Risk of damage to load or to the control unit
→ Switch off ignition and remove remote control before disconnecting or removing load.
- Release electric plug connection for rear-view mirror -arrow a- and pull it off -arrow A- .
- Tie cord -1- onto the plug connection -2- .
- Press rubber sleeve -3- on the wire harness inwards -arrow- .
- Remove rubber sleeve -arrow A- .
- Unscrew fastening screw for rear-view mirror -arrow B- .
- Remove rear-view mirror.
- 6.1. Press in rubber sleeve on door wire harness -arrow A-
.
Access to make it easier to guide out the wire harness.
- 6.2. Lift the rear-view mirror up and off -arrow B- .
- 6.3. Pull wire harness out of the door.
- 6.4. Detach the cord (remains in the door).
- 6.1. Press in rubber sleeve on door wire harness -arrow A-
.