LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (40 Front Wheel Suspension, Drive Shafts -- 911 CARRERA (991)) >> WM 405719 Removing And Installing Front Wheel Bearing (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install central tension bolts in the case of rear-wheel-drive vehicles.
  2. Install wheel bearing housing. Installing Wheel Bearing Housing 
  3. Fit brake cover plate, brake disc, speed sensor.

    Speed sensor: Insert with Optitemp LG2 (spraying can 25ml, part number 000.043.204.21).

scientia non olet · About LEMON Manuals