Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Front drive shaft to wheel hub | Lock nut, M22 x 1.5/always use new lock nuts following removal | Tightening torque | 460 Nm (340 ftlb.) | ||
| Front drive shaft to transmission flange | Cheese head bolt, M8 | Tightening torque | 39 Nm (29 ftlb.) | ||
| Subframe No. 1 to front-axle cross member and body | Hexagon nut/hexagon-head bolt, M10 | Tightening torque | 65 Nm (48 ftlb.) | ||
| Coolant pipes to subframe | Hexagon-head bolt, M6 | Tightening torque | 10 Nm (7.5 ftlb.) |