LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (94 - Lights, Lamps, Switches, Exterior -- 987-BOXSTER-CAYMAN) >> WM 947019 Removing And Installing Auxiliary Brake Light (CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, CAYMAN R) >> Installing Auxiliary Brake Light

Installing Auxiliary Brake Light

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect electric connector to the auxiliary brake light until the connector is felt to engage.
  2. Position auxiliary brake light in rear lid and screw down with the two fastening screws -1-  . → Tightening torque: 1.5 Nm (1 ftlb.) 
    Fig 1: Installing Auxiliary Brake Light
    G09593552Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Check operation of auxiliary brake light.
scientia non olet · About LEMON Manuals