| Wishbone (lower control arm to wheel carrier) (GT4 only) |
Hexagon-head bolt, M12 x 1.5 x 90 |
Tightening torque |
120 Nm (89 ftlb.) |
|
|
| Wishbone (lower control arm) to rear-axle carrier side section (camber eccentric) |
M12 x 1.5 |
Tightening torque |
110 Nm (81.5 ftlb.) |
|
|
| Diagonal control arm to wishbone (lower control arm) |
Hexagon-head bolt, M14 x 1.5 x 75 and hexagon nut |
Tightening torque |
160 Nm (118 ftlb.) |
|
|
| Brake air spoiler to wishbone (GT4 only) |
M6 x 10 |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Level sensor to holder on wishbone |
Lock nut |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|