LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> Collision >> Body Panels >> 51 - Body Center, Roof, Frame - BOXSTER & CAYMAN >> WM 519219 Removing And Installing Cover For Front Underbody (All Models) >> Installing Cover For Front Underbody

Installing Cover For Front Underbody

  1. Installation is performed in reverse order to removal.
  2. Tighten fastening screws -2-  and fastening nuts -3-  using a torque screwdriver Nr.89 Pos.5  .

Fastening screws securing underbody cover to body. Tightening torque 2.7 Nm (2 ftlb.) +/-0.2 Nm (+/-0.1 ftlb.) 

Fastening nuts securing underbody cover to body. Tightening torque 2.7 Nm (2 ftlb.) +/-0.2 Nm (+/-0.1 ftlb.) 

scientia non olet · About LEMON Manuals