LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 61 - Convertible Top, Hardtop -- (981) BOXSTER >> WM 614519 Removing And Installing Rubber Seal With Rail (Lower Lateral) (Except CAYMAN, CAYMAN S, CAYMAN GTS, BOXSTER SPYDER) >> Installing Rubber Seal With Rail (Lower Lateral)

Installing Rubber Seal With Rail (Lower Lateral)

  1. Pre-fit rubber seal at the retaining strip.
  2. Fit fastening screws.
  3. Press retaining strip back completely. -arrows A- 
  4. Tighten fastening screws to the specified tightening torque.
    Fig 1: Pressing Retaining Strip Back
    G10024462Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Hook in seal at the top.
    1. 5.1. Pull seal -1-  up and off. -arrow A- 
    2. 5.2. Hook in seal -1-  at the clip -2-  .
      3. Fig 2: Removing Seal
      G10024463Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  6. Engage seal completely in the retaining strip. -arrows B and C- 
    Fig 3: Engaging Seal
    G10024464Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals