LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 53 - Body Rear - BOXSTER & CAYMAN (981) >> WM 536155 Replacing Inner Side Section (Except BOXSTER, BOXSTER S, BOXSTER GTS, BOXSTER SPYDER) >> Technical Values >> Preliminary Work For Body Repairs (Without Straightening System)

Preliminary Work For Body Repairs (Without Straightening System)

  1. Remove accessories in the repair area.
    1. 1.1. Remove accessories in the repair area according to the extent of damage on the vehicle.
  2. Cover accessories adjacent to the repair area on the vehicle.
    1. 2.1. Cover all accessories remaining on the vehicle and adjacent areas with fire-proof protective covers.
  3. Reshape connection area of the sheetmetal parts to be replaced. See Information on aluminum repairs → 5X00IN INFORMATION ON ALUMINUM REPAIRS .
  4. Expose joint areas.
    1. 4.1. Remove underbody protection, paint, etc. from the joint areas of the body using a hot-air gun or rotary brush.
scientia non olet · About LEMON Manuals