LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (94 - Lights, Lamps, Switches, Exterior -- 911 CARRERA (991)) >> WM 9423IN Bulb Table And Installation Instructions (Except CARRERA "Edition", CARRERA Cabriolet "Edition", Turbo S, CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition") >> Installation Instructions

Installation Instructions

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Live components
  • Risk of electric shock

→ Remove electric charge from component.

→ Make sure it does not switch on again.

→ Check that there is no electric charge

→ Cover adjacent live parts.

NOTE: Incorrect handling of bulbs
  • Risk of damage to bulbs and the bulb housing

→ Switch off ignition and remove ignition key.

→ Switch off the relevant loads when changing bulbs.

→ Only use bulbs listed in the bulb table.

→ Only install clean bulbs that are free of grease.

→ Always use a cloth or soft paper when working with bulbs.

→ Observe the safety instructions when changing a bulb in a Bi-Xenon headlight.

→ In certain states, it is compulsory to carry spare light bulbs.