LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (94 - Lights, Lamps, Switches, Exterior -- 911 CARRERA (991)) >> WM 947819 Removing And Installing Front Angle Sensor For Headlight Beam Adjustment (HBA) (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition") >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Threaded joint for holder on front-axle cross member   Tightening torque 10 Nm (7.5 ftlb.)    
Threaded joint for ball joint for connecting link on holder   Tightening torque 4.5 Nm (3.5 ftlb.)    
scientia non olet · About LEMON Manuals