LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2013 >> Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (94 - Lights, Lamps, Switches, Exterior -- 911 CARRERA (991)) >> WM 947019 Removing And Installing Additional Brake Light In Rear Spoiler (Except CARRERA "Edition", CARRERA GTS CABRIO, CARRERA Cabriolet "Edition", Turbo S, CARRERA 4 "Edition", CARR. 4 GTS CABRIO, CARRERA 4 Cabriolet "Edition", Gt3 RS) >> Installing Additional Brake Light

Installing Additional Brake Light

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Electrically moved components
  • Danger of limbs being trapped or severed

→ Switch off electric power to drive motor.

→ Make sure it does not switch on again.

→ Check that there is no electric charge.

  1. Connect -2-  electric plug connection -1-  to the additional brake light -A-  until it clicks into place -2-  .
    Fig 1: Connecting Brake Light Electric Plug Connection
    G09999285Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Insert additional brake light into the rear spoiler and push in until the additional brake light engages securely -arrows-  .
    Fig 2: Inserting Brake Light
    G09999286Courtesy of PORSCHE CARS NORTH AMERICA, INC.