Technical Values
| Location | Description | Type | Basic Value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brake Calliper To Front And Rear Axle (PCCB and Grey Cast-Iron Brakes) | M12 x 1.5/always use new screws on front and rear axle following removal. Different screw length on front and rear axle (see allocation in PET) | Tightening Torque | 85 Nm (63 ft. lbs.) | ||
| Brake Hose Bracket/Combined Holder To Rear Wheel Bearing Housing (Wheel Carrier) | M6 | Tightening Torque | 10 Nm | ||
| Brake Line To Brake Calliper | M10 x 1 | Tightening Torque | 16 Nm (12 ft. lbs.) |