Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brake Lines To Brake Calliper (Front And Rear Axle) | M10 x 1 | Tightening Torque | 16 Nm (12 ft. lbs.) | ||
| Brake Calliper To Wheel Carrier, Front And Rear Axle (PCCB And Grey Cast-Iron Brakes) | M12 x 1.5/always use new screws on front and rear axle following removal. Different screw length on front and rear axle (see allocation in PET). | Tightening Torque | 85 Nm (63 ft. lbs.) |