Removing Timing Chain

Information 

• The rolling direction of the timing chain must always be the same. 
• If the timing chain is to be reused, the rolling direction of the timing chain must be marked before it is removed. 

Information 

If the timing chain has to be removed or replaced, check the guide and tensioning rails as well as the chain pinions for wear and seeing and replace them if necessary.

1. Loosen the fastening screws on the camshaft timing gears and camshaft controllers (by one or two turns). To do this, counter at the hexagon on the camshaft controller and camshaft timing gear using a ring wrench.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Camshaft timing gears and camshaft controllers

2. Remove timing chain from all sprockets by pulling it forward.