LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera Turbo >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 - Engine - CRANKGEAR, Pistons 4.8L Turbo -- 970 - PANAMERA (970) >> WM, 137419 Removing And Installing Crankshaft Sealing Ring For Pulley/Vibration Balancer >> Removing Crankshaft Sealing Ring For Pulley/Vibration Balancer

Removing Crankshaft Sealing Ring For Pulley/Vibration Balancer

  1. Loosen the four fastening screws -Arrows-  and remove joint flange with sealing ring.

    Replace joint flange and sealing ring.

    G15197976Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing joint flange with sealing ring

  2. Clean contact surfaces.
scientia non olet · About LEMON Manuals