Preliminary Work
- Remove brake light switch → 943619 REMOVING AND INSTALLING BRAKE LIGHT SWITCH
.
- Disengage push rod -1-
.
- 2.1. Unlocking tool 9767 -2-
must be guided from below into the pressure piece -3-
in front of the ball joint on the push rod -1-
.
- 2.2. Fit unlocking tool -2-
at the bottom of the crash support -5-
.
- 2.3. Press lever on unlocking tool forward to separate the pressure piece -3-
from the ball joint on the push rod -1-
.
- 2.4. Touch the brake pedal -4-
gently to release the push rod -1-
and then pull it back again.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Remove steering column → 481519 REMOVING AND INSTALLING STEERING COLUMN
.