Trim Panels On A B C Pillars
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw for ventilation duct | Item 1 | Tightening torque | 5.5 Nm (4 ftlb.) | ||
|
Securing ventilation duct |
|||||
| Fastening screw for armrest extension | Item 2 | Tightening torque | 5.5 Nm (4 ftlb.) | ||
|
Positioning armrest extension |
|||||
| Fastening screw securing upper part to B-pillar | Item 5 | Tightening torque | 5.5 Nm (4 ftlb.) | ||
|
Securing trim panel at the top |
|||||
| Fastening screws securing front part of trim panel for C-pillar | Item 8/top | Tightening torque | 1.7 Nm | ||
|
Securing front part of C-pillar trim panel |
|||||
| Fastening screws securing front part of trim panel for C-pillar | Item 8/bottom | Tightening torque | 1.7 Nm | ||
|
Securing front part of C-pillar trim panel at the bottom |
|||||
| Fastening screw securing belt fitting to body | Tightening torque | 50 Nm (37 ftlb.) | |||
|
Securing belt fitting |
|||||
| Fastening screw for backrest panel | Item 1 | Tightening torque | 10 Nm (7.5 ftlb.) | +/-1 Nm (+/- 0.5 ftlb.) | |
|
Securing backrest side panel |
|||||
| Fastening screw for armrest extension | Item 3 | Tightening torque | 5.5 Nm (4 ftlb.) | ||
|
Securing armrest extension |
|||||
| Fastening screw securing rear part of trim panel for C-pillar | Tightening torque | 5.5 Nm (4 ftlb.) | |||
|
Securing rear part of C-pillar trim panel |
|||||
| Bolt for roll-up sunblind | Tightening torque | 12 Nm | |||
|
Screwing in bolt for roll-up sunblind |
|||||
| Fastening screw securing trim panel for A-pillar | Item 2 | Tightening torque | 4.5 Nm | ||
|
Securing A-pillar at the top |
|||||