Removing B-Pillar Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Drill out five blind rivets -1-
on the roof molding.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Guide roof molding up and off.
- Fold over the seal on the top of the door sub-frame and remove the remaining pieces of the rivets.
- Carefully lift up the roof molding and pull the window guide out of the B-pillar cover.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Mark installation position of B-pillar cover.
- 5.1. Apply markings -3-
around the screw heads of the fastening screws -2-
.
- 5.2. Apply markings -3-
at the top, underneath the roof molding.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Unscrew fastening screws -2-
for the B-pillar cover.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Remove the remaining parts of the rivets -1-
.
- Guide B-pillar cover up and remove it.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.