LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera Turbo >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 50 - Body Front - PANAMERA (970) >> WM 503809 Loosening And Securing Lock Carrier (Service Position) (Except PANAMERA S Executive, PANAMERA Executive, PANAMERA 4 S Executive, PANAMERA Turbo Executive, PANAMERA Turbo S, PANAMERA Turbo S Executive, PANAMERA GTS, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Securing Lock Carrier

Securing Lock Carrier

  1. Position the lock carrier.
    1. 1.1. Centre the lock carrier.
    2. 1.2. Set dimension -Z-  to → Adjustment value: 30 mm  .

      Positioning lock carrier 

    3. 1.3. Screw in a screw to secure the lock carrier on both sides.

      Securing lock carrier 

  2. Screw in the remaining fastening screws on the bumper and tighten all screws to → Tightening torque: 50 Nm (37 ftlb.) +5 Nm (+3.5 ftlb.)-7.5 Nm (-5.5 ftlb.)  .

    Fastening screws for bumper 

  3. Screw in fastening screws on the top of the lock carrier and tighten to the specified tightening torque.

    Mounting for lock carrier, top 

  4. Plug in wire harness for front luggage compartment.

    Plugging in wire harness 

  5. Install upper air guide.

    Installing upper air guide 

scientia non olet · About LEMON Manuals