Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Trim panel to lid | Tightening torque | 5 Nm (3.5 ftlb.) | +/-1 Nm (+/-0.5 ftlb.) | ||
|
Unscrewing fastening screws under finger plate |
|||||
|
Unscrewing fastening screws |
|||||
| Unscrewing fastening screws | |||||
| Screws on finger plate | Tightening torque | 5 Nm (3.5 ftlb.) | +/-1 Nm (+/-0.5 ftlb.) | ||
|
Removing finger plate |
|||||