Installing Side Section Trim
Information
- Check that all fixing clips are positioned fully and correctly.
- Check that the fixing clips are not bent or broken.
- Replace damaged or missing clips with new ones.
Information
- Make sure that the retaining lugs are not bent or broken.
- Replace the trim panel if the retaining lugs are damaged.
- Guide in side section trim.
- 1.1. Push side section trim into the A-pillar trim from below -A- .
- 1.2. Push in side section trim at the bottom -B- .
- Clip in the trim panel.
- 2.1. Fit fixing clips in the cut-out in the middle of the trim panel.
- 2.2. Clip in fixing clips -A- .
- 2.3. Clip trim panel into the door sill trim -B- .
- 2.4. Clip trim panel into the A-pillar trim -C- .