LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera Turbo >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> 91 - Radio, Stereo, Telephone, On-Board Computer -- PANAMERA (970) >> WM 917319 Removing And Installing Control Unit For Reversing Camera (Except PANAMERA S Executive, PANAMERA Turbo Executive, PANAMERA GTS) >> Removing Control Unit For Reversing Camera

Removing Control Unit For Reversing Camera

  1. Open the lever on the holder -2-  (-A-  ) and remove control unit for reversing camera -1-  (-B-  ).
    Fig 1: Removing Control Unit For Reversing Camera
    G09813919Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Information 

    Always comply with the regulations for handling ESD-sensitive components!

    • Assembly work may only be carried out if the mechanic is wearing the working clothes and shoes approved by Porsche. 
    • The new part must only be removed from the ESD (electrostatic discharge) protective packaging just before installation and at the position at which the part is to be installed. 
    • Never touch the electric pins and plug contacts. 
  2. Release electric plug connection -3-  (-a-  ), push the locking mechanism to the side -C-  and pull off the connector -D-  .
    Fig 2: Disconnecting Electric Plug Connections
    G09813920Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Release electric plug connections -4-  (-b-  ) and disconnect them.