LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera S >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> 43 - Level Control, Air Suspension -- PANAMERA (970) >> WM 431619 Removing And Installing PASM Control Unit (Except PANAMERA Executive, PANAMERA GTS, PANAMERA Turbo S, PANAMERA 4 Executive, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Installing PASM Control Unit

Installing PASM Control Unit

  1. Insert control unit into the holder and clip it securely to the holder.
  2. Fit and clip in retaining bar.
  3. Plug in and lock the electric connectors.
  4. Position control unit and holder and secure them with the three fastening nuts. Tightening torque 9.7 Nm (7.5 ftlb.) 
    Fig 1: Securing Holder With Fastening Screws
    G09807799Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals