Installing Belt TENSIONER

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Damper/tensioner

Information 

• When fitting the damper element/tensioner, ensure that the label can be read from outside.
• The bellows must be facing upwards.
• Tensioner to lever. M8 -arrow-  > Tightening torque 32 Nm (24 ftlb.) 

1. Position belt tensioner -2-  .
2. Fit fastening screws -3-  .

   Use correct tightening torques

   > Refer to 1001TW Tightening torques, tightening sequences, assembly overviews in the appropriate service information. 

   Fig 1: Belt Drive Components Location

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Belt drive

   1	Deflection roller 2
   2	Hydraulic belt tensioner
   3	Screw, M8 x 96
   4	Deflection roller 1
   5	Dual poly V-belt