LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera S >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> 19 - Engine - Cooling -- PANAMERA (970) >> WM 196120 Removing And Installing Coolant Pipes (PANAMERA S E-Hybrid, PANAMERA S Hybrid) >> Removing And Installing Pipes For Engine Oil Cooler >> Installing Pipes For Engine Oil Cooler

Installing Pipes For Engine Oil Cooler

Information 

For tightening torques, tightening sequence and assembly overview, see → 1001IN TIGHTENING TORQUES, TIGHTENING SEQUENCES, ASSEMBLY OVERVIEWS

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1. Replace O-rings.
    2. 1.2. Secure all hose connections with standard hose clamps.
    3. 1.3. Before installation, clean or smoothen the sealing face for the O-ring.
    4. 1.4. Moisten the O-ring with coolant and slide it onto the coolant pipe.
  2. Install left engine support.
  3. Install electric air-conditioning compressor. → Installing Air-Conditioning Compressor
  4. Fill in coolant. → Filling Coolant 
scientia non olet · About LEMON Manuals