TV Front Apron
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw, retaining strip | Tightening torque | 2.8 Nm (2 ftlb.) | |||
|
Installing front holder |
|||||
| Front apron to lock carrier | Tightening torque | 5 Nm | +/-0.5 Nm (+/-0.5 ftlb.) | ||
|
Front screws at the top |
|||||
| Front apron to lateral wing | Tightening torque | 2.8 Nm (2 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
|
Wing screw |
|||||
| Fastening screw securing bumper to longitudinal member | Tightening torque | 50 Nm (37 ftlb.) | +5 Nm (+3.5 ftlb.) | -7.5 Nm (-5.5 ftlb.) | |
|
Bumper mounting |
|||||