TV Centre Console

Location	Description	Type	Basic value	Tolerance 1
Fastening screw securing lower part of center console cover		Tightening torque	2.5 Nm	+/-0.5 Nm (+/-0.5 ftlb.)
Securing cover
Fastening screw at top of center console		Tightening torque	3.2 Nm (2 ftlb.)	+/-0.5 Nm (+/-0.5 ftlb.)
Securing center console at the top
Centre console fastening screws in package box		Tightening torque	3.2 Nm (2 ftlb.)	+/-0.5 Nm (+/-0.5 ftlb.)
Securing center console
Fastening screw for front ashtray		Tightening torque	2.5 Nm	+/-0.5 Nm (+/-0.5 ftlb.)
Securing front ashtray
Front fastening screw securing center console to center tunnel	Torx screw	Tightening torque	3.2 Nm (2 ftlb.)	+/-0.5 Nm (+/-0.5 ftlb.)
Front screws
Rear fastening screw securing center console to center tunnel	Torx screw	Tightening torque	3.2 Nm (2 ftlb.)	+/-0.5 Nm (+/-0.5 ftlb.)
Installing center console
Fastening screws for cover extension in storage compartment		Tightening torque	2.5 Nm	+/-0.5 Nm (+/-0.5 ftlb.)
Securing extension for cover in storage compartment
Lower fastening screw for cover extension in storage compartment		Tightening torque	2.5 Nm	+/-0.5 Nm (+/-0.5 ftlb.)
Securing extension for cover in storage compartment
Fastening screws, rear		Tightening torque	27 Nm
Installing rear center console (Business)
Fastening screw, front and bottom		Tightening torque	3.2 Nm (2 ftlb.)	+/-0.5 Nm (+/-0.5 ftlb.)
Screwing in fastening screws at the front, bottom and sides
Fastening screws securing damper to package box cover		Tightening torque	3.2 Nm (2 ftlb.)	+/-0.5 Nm (+/-0.5 ftlb.)
Securing damper
Fastening screws securing bracket to center console		Tightening torque	2.5 Nm	+/-0.5 Nm (+/-0.5 ftlb.)

Fig 1: Identifying Bracket In Rear Centre Console

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Rear cupholder (Business) to center console		Tightening torque	1.5 Nm (1 ftlb.)	+0.2 Nm (+0.1 ftlb.)	-0.4 Nm (-0.2 ftlb.)
Screwing in fastening screws