Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening nuts for spoiler drive | Item 7 | Tightening torque | 9 Nm | ||
|
Securing spoiler drive |
|||||
| Fastening screws for spoiler drive | Item 6 | Tightening torque | 9 Nm | ||
|
Securing spoiler drive |
|||||
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw securing closing element of rear spoiler to spoiler drive | Item (B) | Tightening torque | 4.5 Nm (3 ftlb.) | +/-0.5 Nm (+/- 0.5 ftlb.) | |
|
Installing closing element of rear spoiler |
|||||
| Fastening screw securing lower part of rear spoiler to spoiler drive | Tightening torque | 4.5 Nm (3 ftlb.) | +/-0.5 Nm (+/- 0.5 ftlb.) | ||
|
Installing lower part of rear spoiler |
|||||
| Gap from bolt to bolt (inner side) | Dimension A | Adjustment value | 556 mm | ||
|
Laying spoiler drive onto special tool |
|||||
| Fastening nut securing spoiler drive to engine housing | Tightening torque | 1 Nm (0.5 ftlb.) | |||
|
Screwing off spoiler drive nuts |
|||||
| Fastening screw for securing rear spoiler microswitch to spoiler drive | Tightening torque | 1 Nm (0.5 ftlb.) | |||
|
Installing wire harness for rear spoiler |
|||||