LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera S >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 55 - Lids, Flaps -- PANAMERA (970) >> WM 553119 Removing And Installing Front Pneumatic Spring (Except PANAMERA Executive, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Function Test On Pneumatic Spring

Function Test On Pneumatic Spring

  1. Close and open the lid several times to check that the pneumatic springs are working properly and were fitted correctly.
  2. Open the lid fully. The two fitted pneumatic springs must hold the lid open.
  3. Close the lid.
scientia non olet · About LEMON Manuals