LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 10 - Engine - Crankcase, Suspension -- PANAMERA (970) >> WM 108319 Removing And Installing Engine Cover (Design Cover) (PANAMERA S E-Hybrid & PANAMERA S Hybrid) >> Installing Engine Cover (Design Cover)

Installing Engine Cover (Design Cover)

  1. Position the engine cover (design cover) -1- evenly on the four clamps.
    Fig 1: Pull Off/Installing Engine Cover (Design Cover)
    G00541976
  2. Press the engine cover (design cover) onto the four clamps and two retaining pins (centre) one at a time.
  3. Check that the engine cover (design cover) is seated correctly.
scientia non olet · About LEMON Manuals