Subsequent Work

Screw on and tighten nut -arrow- for right engine mount.

Fig 1: Locating Right Engine Mount
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Screw on and tighten nut -arrow- for left engine mount.

Fig 2: Locating Left Engine Mount
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove engine support. → WM 1001IN SUPPORTING ENGINE ON THE BODY (ENGINE SAFETY DEVICE)
Install throttle valve cover.
1. 4.1. Fit throttle valve cover.
2. 4.2. Connect the vacuum hose -3- at the throttle valve cover and clip in tank vent line -4- and XY line -5- .
3. 4.3. Fit throttle valve cover and tighten screw-type clamp -2- .
4. 4.4. Fit cover at the connection for the air cleaner and tighten screw-type clamp -1- .
  
  Fig 3: Identifying Throttle Valve Cover
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install engine cover. → 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER)
Connect the battery. → 270619 REMOVING AND INSTALLING BATTERY