Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Spring strut to lower wishbone | M12 x 1.5 thread | Tightening torque | 90 Nm (67 ftlb.) | +120° | |
| Supporting mount to body | M10 x 1.5 thread | Tightening torque | 46 Nm (34 ftlb.) | ||
| 2 - Anti-roll bar mount to spring strut, elastomer joint, conventional | M12 x 1.5 thread - New type, conventional | Tightening torque | 40 Nm (30 ftlb.) | +90° | |
| 1 - Anti-roll bar mount to spring strut, ball pin, PDCC | M12 x 1.5 thread - New type, PDCC | Tightening torque | 50 Nm (37 ftlb.) | +30° |