LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera Base >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> 42 - Rear Wheel Suspension, Drive Shafts -- PANAMERA (970) >> WM 425855 Replacing Rear Wheel Bearing (Except PANAMERA GTS, PANAMERA Turbo S, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Tools And Materials >> Tools

Tools And Materials: Tools

Tool overview for wheel bearing

Fig 1: Identifying Tools For Rear-Axle Wheel Bearing
G09807657Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. -1-  - Small ram for workshop press (30 mm)  Screwing into the workshop press
  2. -2-  - Press-on sleeve 9694/3  Pressing on wheel hub, for positioning the wheel bearing housing with wheel bearing
  3. -3-  - Separating device Nr.111  Pressing inner wheel bearing race off the wheel hub
  4. -4-  - Pressure piece VW 454  Pressing in bond rubber mounting
  5. -5-  - T 10230/8 pipe Assembly fixture T10230  Pressing in bond rubber mounting, for positioning the wheel bearing housing
  6. -6-  - T 10205/10 pressure piece Attachments T10205  (attachments T10205) Pressing in wheel bearing and wheel hub
  7. -7-  - Pressure plate VW 402  Pressing out bond rubber mounting, for positioning the wheel bearing housing
  8. -8-  - T 10230/14 pipe Assembly fixture T10230  Pressing in wheel bearing, for positioning the wheel carrier
  9. -9-  - T 10205/5 pipe Attachments T10205  Pressing out wheel bearing (wheel bearing fits through pipe T10205/5)
  10. -10-  - Large ram for workshop press (70 mm)  Screwing into the workshop press
scientia non olet · About LEMON Manuals