Installing Lock For Rear-Seat Backrest
- Insert cable -a-
(-arrow F-
) and lock it -arrow G-
.
- Position lock on the seat -arrow H-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Screw in fastening screws for the lock and tighten to the specified tightening torque. Tightening torque 23 Nm (17 ftlb.) +/-2.5 Nm (+/-2 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Fit cover at the sides -arrow I-
and clip it in by pushing it inwards -arrow J-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Tighten fastening screws on cover.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Fold the backrest over and move it into position.