LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera Base >> Repair and Diagnosis >> Body & Frame >> Seats >> 72 - Seat Frames -- PANAMERA (970) >> WM 726319 Removing And Installing Locking Mechanism For Rear Backrest (Except PANAMERA Executive, PANAMERA 4 Executive) >> Removing Locking Mechanism For Rear Backrest

Removing Locking Mechanism For Rear Backrest

  1. Remove foam part -arrow A-  of the headrest.
  2. Unclip locking lug on the headrest support -1-  and remove it -arrow B-  .
    Fig 1: Unclipping Headrest Support
    G09812680Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Unscrew and remove fastening screw on retaining bracket for lock.
    Fig 2: Removing Retaining Bracket
    G09812681Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Unscrew and remove the two front fastening screws on the front locking mechanism.
  5. Turn the backrest frame and unscrew and remove the two fastening screws on the rear side.
    Fig 3: Removing Backrest Frame Mounting Screws
    G09812682Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  6. Release cable holder in a downward direction and remove it by pulling it up through the backrest frame.
    Fig 4: Removing Cable Holder
    G09812683Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  7. Remove complete locking mechanism for rear backrest.