Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Milling depth for M12 threaded bush | Dimension X (measured from outer sheetmetal edge) | Test and adjustment value | 12 mm | ||
| Milling depth for M14 threaded bush on rear axle | Dimension X (measured from outer sheetmetal edge) | Test and adjustment value | 4 mm | ||
| Thread depth, M12 | Dimension Y (measured from outer sheetmetal edge) | Test and adjustment value | 40 mm | ||
| Thread depth, M14, rear axle | Dimension Y (measured from outer sheetmetal edge) | Test and adjustment value | 35 mm |