Removing Padding For Front Middle Backrest
- Use a plastic wedge to lift up and detach the cover under the headrest -arrow- .
- Guide the cover through towards the front under the headrest -arrows- .
- Lift up the backrest cushion -arrows- .
- Guide the backrest cushion out of the guide in the side bolsters on both sides -arrow-
using a plastic wedge to press back the clips on the backrest padding.
Information
To prevent damage, do not bend the installed backrest cushion too far forward.
- Only for seats with air conditioning:
Swivel the backrest cushion forward slightly and release the air-guide cowl for seat ventilation on both sides -A- and remove it -B- .
→ 741619 REMOVING AND INSTALLING SUCTION FAN FOR BACKREST SURFACE
- Swivel the backrest cushion forward onto the seat surface -arrow- and set it down.
- Loosen the two restraining straps on the rear of the seat from underneath -arrows- .
- Use a plastic wedge to lift up and detach the cover on the lower backrest frame -arrows- (4 clips).
- Only for heated seats:
Disconnect the plug connections for heated seats.
- Move backrest cushion and cover forward off the seat and remove them -arrows-
.
Information
To replace the padding for the middle backrest, remove the cover on the front middle backrest.