TV Rear Apron
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Rear apron fastening screws | Tightening torque | 2.8 Nm (2.1 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
|
Screws on frame for light |
|||||
| Lateral retaining strip | Tightening torque | 4.8 Nm (3.5 ftlb.) | +/-1 Nm (+/-0.5 ftlb.) | ||
|
Removing lateral retaining strip |
|||||
| Centre retaining strip to end plate | Tightening torque | 4.8 Nm (3.5 ftlb.) | +/-1 Nm (+/-0.5 ftlb.) | ||
|
Centre retaining strip |
|||||
| Lower retaining strip to end plate | Tightening torque | 4.8 Nm (3.5 ftlb.) | +/-1 Nm (+/-0.5 ftlb.) | ||
|
Removing lower holder |
|||||
| Fastening screw for holder with heat protection | Tightening torque | 4.8 Nm (3.5 ftlb.) | +/-1 Nm (+/-0.5 ftlb.) | ||
|
Removing holder with heat protection |
|||||
| Fastening nut for holder with heat protection | Tightening torque | 4.8 Nm (3.5 ftlb.) | +/-1 Nm (+/-0.5 ftlb.) | ||
|
Removing holder with heat protection |
|||||
| Fastening screw securing bumper to bodyshell | Tightening torque | 65 Nm (48 ftlb.) | +/-6.5 Nm (+/-5 ftlb.) | ||
|
Removing bumper |
|||||