Removing Dipped Beam Halogen Bulb

→ Switch off ignition and remove ignition key.

→ Switch off the relevant loads when changing bulbs.

→ Only use bulbs listed in the bulb table.

→ Only install clean bulbs that are free of grease.

→ Always use a cloth or soft paper when working with bulbs.

→ Observe the safety instructions when changing a bulb in a Bi-Xenon headlight.

→ In certain states, it is compulsory to carry spare light bulbs.

1. Release rear cover at the clips and open it.
   Fig 1: Opening Rear Cover Clips

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Remove the halogen bulb and socket from the bracket by turning once in direction of arrow.
   Fig 2: Turning To Remove Halogen Bulb And Socket

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Unplug connector on halogen bulb.
   Fig 3: Disconnecting Halogen Bulb Connectors

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.