Removing (Central) Headlight Control Unit

→ Remove the ignition key and switch off load before disconnecting or removing load.

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Assembly work may only be carried out if the mechanic is wearing the working clothes and shoes approved by Porsche. 
• The new part must only be removed from the ESD (electrostatic discharge) protective packaging just before installation and at the position at which the part is to be installed. 
• Never touch the electric pins and plug contacts. 

1. Switch off ignition and pull remote control out of ignition lock.
2. Unscrew fastening screw -1-  on the (central) headlight control unit -2-  .
   Fig 1: Loosening (Central) Headlight Control Unit Fastening Screw

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Pull (central) headlight control unit -1-  to the right and out of holder -2-  .
   Fig 2: Removing (Central) Headlight Control Unit

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Release swivel bar -1-  (-a-  ), bend it over -b-  and disconnect electric plug connection from the (central) headlight control unit -2-  .
   Fig 3: Disconnecting Electric Plug Connection

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.