LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera 4S >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> 43 - Level Control, Air Suspension -- PANAMERA (970) >> WM 430115 Calibrating The Levelling System (Except PANAMERA GTS, PANAMERA Turbo S, PANAMERA 4 Executive, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Checking >> Notes On Calibration

Notes On Calibration

The nominal values for the nominal heights of the level sensors are stored in the control unit (F1 - Help). The actual values of the respective axle heights, front left, front right, rear left, rear right, have to be measured manually and then entered using the Porsche System Tester. The actual values must be measured on the front and rear axle, both on the left and right. → 430115 CALIBRATION  - section on "Information" - Height measurement point on rear axle; - Height measurement point on front axle

See also: → 430115 Calibration - section on "Information"  - Conditions for carrying out calibration