Removing Clutch Switch Interlock
Information
Installation position:
The clutch switch interlock is located under the wheel housing liner in the driver's side front wheel housing.
It is connected to the clutch master cylinder by a locking mechanism.
- Clutch master cylinder
- Electric plug connection with clutch switch interlock
- Pressure hose connection
- Supply hose connection
- Push rod
- Retaining clip for push rod
- Release and pull off electric push-on connector -3- .
- Release the locking mechanism of the clutch switch interlock by pressing to the rear with a screwdriver -a- and pull it down and off -B- .