LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera 4S >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 - Engine - CRANKGEAR, Pistons -- PANAMERA (970) >> WM 137419 Removing And Installing Crankshaft Sealing Ring For Pulley/Vibration Balancer (Except PANAMERA S E-Hybrid, PANAMERA S Hybrid, PANAMERA Executive, PANAMERA GTS, PANAMERA Turbo S, PANAMERA 4S Sport Edition, PANAMERA 4 Executive, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Removing Crankshaft Sealing Ring For Pulley/Vibration Balancer

Removing Crankshaft Sealing Ring For Pulley/Vibration Balancer

  1. Loosen the four fastening screws -arrows-  and remove the cover with sealing ring.
    Fig 1: Removing Cover Using Sealing Ring
    G09804413Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Clean the sealing surface of the sheetmetal cover.


  1. Loosen the four fastening screws -arrows-  and remove the cover with sealing ring.
    Fig 1: Removing Cover Using Sealing Ring
    G09804418Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Clean the sealing surface of the sheetmetal cover.
scientia non olet · About LEMON Manuals