LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera 4S >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> 19 - Engine - Cooling -- PANAMERA (970) >> WM 197819 Removing And Installing Coolant Temperature Sensor (PANAMERA S, PANAMERA 4S, PANAMERA 4 S Executive, PANAMERA S Executive) >> Installing Coolant Temperature Sensor

Installing Coolant Temperature Sensor

  1. Fit coolant temperature sensor into the cylinder head and screw it in. Tighten coolant temperature sensor. Tightening torque 30 Nm (22 ftlb.) 
  2. Plug in and lock electric plug connection on the coolant temperature sensor.
  3. Screw in and tighten the screws on the connection (replace seal) and the screw on the secondary air valve holder at the right.
scientia non olet · About LEMON Manuals