LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera 4S >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> 19 - Engine - Cooling -- PANAMERA (970) >> WM 196919 Removing And Installing Heater Valve (PANAMERA S E-Hybrid, PANAMERA S Hybrid) >> Installing Coolant Pump For Low-Temperature System >> Installing Heater Valve

Installing Heater Valve

Information 

For tightening torques, tightening sequence and assembly overview, see → 1001IN TIGHTENING TORQUES, TIGHTENING SEQUENCES, ASSEMBLY OVERVIEWS

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Fill in coolant for high-temperature system. → Filling Coolant 

scientia non olet · About LEMON Manuals